Custom solutions since 1983
Listening to the customer, constant attention to market demands, targeted investments for the development of technologies and the growth of our people have allowed us to offer specialist know-how in the production of membrane switches, electronics enclosure, display frames, fronts and panels generally for electronic equipment.
Our goal? Helping our customers make a difference.
On this page we have highlighted the stages of our evolution: after more than 40 years of commitments, challenges and goals we have reached a prominent position for the quality and level of customization offered.
But what distinguishes us from other similar companies? Our team of professionals is characterized by the Spirit of Initiative, which starts from the ability to listen to the needs expressed by a customer.
The expertise and experience gained therefore lead us to translate these needs into particularly effective solutions, which propose solutions that sometimes escape the prior analysis of the potential customer.
Exceeding expectations is our greatest satisfaction.
MCS offers to its customers:
Added value
There are many ways to make a membrane switch, an electronics enclosure or a display frame, but only one way to develop long-term relationships: provide a product whose value goes beyond itself through accurate advice, a careful planning and design, after sales service.
To this we also add quality, which for us is not just an abstract concept or a working system: it means keeping promises and achieving pre-established goals. It is no coincidence that our Quality System is certified ISO 9001 by the international authority Dasa-Rägister.
Innovation
A significant part of economic resources is invested to adopt and develop new technologies and continue to offer the best solutions in terms of functionality, effectiveness, versatility and aesthetics. Solutions designed and manufactured exclusively in our company.
From CNC machining to silkscreen printing, from liquid conductive coating to digital and 3D printing, all production processes are concentrated in our headquarters of approximately 2,700 square meters: this allows us to offer a complete service in a coordinated and efficient way.
Customization
Investments in technology and innovation would be meaningless if they weren’t aimed at giving the customer the most complete answer, the major advantage. We feel like tailors making bespoke garments.
Just as a made-to-measure suit enhances the figure of the wearer to the max, so MCS products respond to customer needs by enhancing their operational and commercial performance.
MCS – Master per Circuiti Stampati
From the passion for electronics of the founder Mr. Giorgio Vignaga, MCS was born in 1983 in a small studio in Arzignano (VI), as an individual company dedicated to the design of masters for printed circuits.
MCS from unlimited partnership becomes Srl (limited liability company) and by integrating new partners it transforms itself into a productive reality by moving to a 300m² building in Via Pacinotti in Brendola.
The brand also evolves, becoming MCS Accessories for Electronics.
With the collaboration of a silkscreen printing master with experience in the German market, the first processes with screen printing process begin.
After acquiring the first silkscreen printing skills, MCS starts making switches on PCB (printed circuit board) and membrane switches with flexible circuit.
Introduction of the cnc milling process with the first flat milling machine (partly self-built), for mechanical machining of plastic material supports for the production of front plates and front panels for electronic instruments.
MCS’s first production expansion begins. In fact, we moved from the first 300m² workshop to the new 900m² headquarters.
The company further specializes and made up of 2 primary macro-processes: silkscreen printing and cnc machining.
MCS Srl, from the initial ownership of 3 different partners, was 100% acquired by the founder Mr. Giorgio Vignaga and his wife Mrs. Manuela Dal Maso.
MCS achieved the first ISO9001:2000 Quality Certification from international Dasa Rägister authority.
Alongside the screen printing process is added the first digital resource, with the first Mimaki Ink-Jet installed in Europe.
First CNC machining of solid objects begins with first 3-axis milling machine of 1500×3000 format.
Moving to new production site. From 900m² to a new larger and more modern structure on an area of 2700m².
Presentation of the new registered logo. The acronym for MCS becomes Mechatronic Custom Solutions.
The Brama project is born, a brand dedicated to the design and production of electric plaque and switches for nautical environment and building automation.
To increase production efficiency, MCS builds the first rotating vice milling cutter, for the sequential processing of 4 different sides of plastic and metal enclosures for electronics.
To ensure flexibility and process control, MCS adds spray finishing in it’s production line.
With the use of industrial coating process we start customizing finishes of customized and commercial enclosures. Conductive coating for EMI/ESD shielding is also added.
Creation of a new CNC machining department for the milling of plastic and aluminium blocks.
Beginning of the first generational transition. Born MCS DUE srl, owned by brothers Mr. Alessandro and Mrs. Valeria Vignaga always present and operative in the company.
MCS integrates new services in addition to the design and production of membrane switches, mechanical parts and small enclosures from solid, specializing more and more in the design and manufacture of customized electronics enclosures, integrating complementary mechanical engineering and industrial design skills into the staff of its technical office.
Introduction of the 3D printing process with Stratasys FDM technology in the technical office, for the creation of mockups, prototypes and production equipment.
MCS chooses the Multi Jet Fusion 3D printing technology for the mass production of mechanical parts and electronic enclosures in Nylon PA12 plastic material, developing at the same time specific skills in the finishing and aesthetic coating of objects built in 3D, for functional use and not just for prototyping.
Revision and upgrading of machinery and of the layout of the production departments. Expansion of the CNC machining department, of the sheet metal machining department, of the assembly department and creation of a new coating department.
An important milestone with the achievement of 40 years of business activity.